KDPE234GPS F22 error
Your KitchenAid KDPE234GPS is showing F22. Before replacing parts, confirm the model tag matches KDPE234GPS: Check the door frame, inside the door opening, or the rear panel near the exhaust. On this KitchenAid dryer, F22 means Exhaust thermistor open — the dryer cannot read exhaust temperature. The steps below follow the field-service order for the KDPE234GPS platform — not the generic KitchenAid F22 page. Parts listed below are confirmed compatible with KDPE234GPS. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Buy the replacement part
MPN: 3392519
$12.99
Fix steps
- Verify the model tag reads KDPE234GPS — Check the door frame, inside the door opening, or the rear panel near the exhaust.
- Reset F22: unplug the dryer or switch off the breaker for 5 minutes, then restore power.
- Clean the lint screen, inspect the exhaust hose and exterior vent hood, and confirm electric dryers have both legs of 240V power for F22.
- Parts listed below are confirmed compatible with KDPE234GPS.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F22 mean on a KitchenAid KDPE234GPS?
Exhaust thermistor open — the dryer cannot read exhaust temperature.
How do I reset F22 on a KDPE234GPS?
Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. If F22 returns on the KDPE234GPS, the underlying fault is still present.
What part do I need for KDPE234GPS F22?
Start with the KDPE234GPS-compatible parts listed below. F22 often points to a failed component on this KitchenAid dryer.
Is F22 on the KDPE234GPS easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.