KitchenAid Dryer F22 error code
Dryer
KitchenAid dryer error code F22 means: Exhaust thermistor open — the dryer cannot read exhaust temperature. This guide covers how to reset the code, the most common causes, step-by-step troubleshooting, and replacement parts that typically resolve F22.
Buy the replacement part
MPN: 3392519
$12.99
Safe to keep using?
Stop using
No immediate safety hazard detected, but monitor during use.
- • Unplug the appliance before inspection.
- • Do not continue using the appliance until the cause is identified.
2 product recalls may apply
Brand-level matches — verify your model.
Show
2 product recalls may apply
Brand-level matches — verify your model.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$100
What it means
Exhaust thermistor open — the dryer cannot read exhaust temperature.
How to fix it
- Unplug the dryer or turn off power at the breaker before inspecting any components.
- Reset KitchenAid F22: leave power off for 5 minutes, restore power, then restart. Confirm whether F22 returns.
- Check the most common cause for F22: Exhaust thermistor open — the dryer cannot read exhaust temperature.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, the fix often requires a replacement part (see recommended parts below).
- Reassemble, restore power, and run a test cycle. If F22 returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
FAQ
What does F22 error code mean on a KitchenAid dryer?
Exhaust thermistor open — the dryer cannot read exhaust temperature.
What does KitchenAid F22 mean?
Exhaust thermistor open — the dryer cannot read exhaust temperature.
How do I reset KitchenAid dryer F22?
Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored F22 after a glitch, but the code will return if the underlying fault is still present.
What part do I need for KitchenAid F22?
Often yes — error F22 frequently points to a failed component. Check the recommended parts below for direct replacements.
Can I fix KitchenAid error F22 myself?
Many F22 errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Do I need a replacement part for F22?
Often yes — error F22 frequently points to a failed component. Check the recommended parts below for direct replacements.
Other KitchenAid Dryer codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Exhaust thermistor open — the dryer cannot read exhaust temperature.
FixApplianceCode guidance
Start with basic checks for KitchenAid F22 before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-08-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure