KDTM604KPS F8E4 error
If your KitchenAid KDTM604KPS is showing error code F8E4, here's what it means for this specific model: Water detected in the drip tray — empty the tray and check for leaks. Follow the steps below to reset the code, troubleshoot, and find compatible replacement parts.
Fix steps
- Confirm your model is KDTM604KPS (check the model tag).
- Reset F8E4 on the KDTM604KPS: unplug or switch off the dishwasher for 5 minutes, then restore power.
- Water detected in the drip tray — empty the tray and check for leaks.
- Follow the part recommendations below that are compatible with your model.
- Run a test cycle after repair to confirm the code is cleared.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does F8E4 mean on a KitchenAid KDTM604KPS?
Water detected in the drip tray — empty the tray and check for leaks.
How do I reset F8E4 on a KDTM604KPS?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If F8E4 returns on the KDTM604KPS, the underlying fault is still present.
What part do I need for KDTM604KPS F8E4?
Try the reset and troubleshooting steps first. F8E4 on the KDTM604KPS is not always a failed part.
Is F8E4 on the KDTM604KPS easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.