DW80R5060US LC error
Your Samsung DW80R5060US is showing LC. Before replacing parts, confirm the model tag matches DW80R5060US: Open the door and look on the inner door edge or left/right side of the tub opening. On this Samsung dishwasher, LC means Leakage error — the leak sensor detected moisture. The dishwasher will keep draining to protect the floor. The steps below follow the field-service order for the DW80R5060US platform — not the generic Samsung LC page. Cross-check part fit with DW80R5060US before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Parts for this repair
We don't yet have a verified exact part number for this model. Search Amazon for Samsung dishwasher parts and confirm the model number first.
Check current price & availability
FixApplianceCode may earn a commission from qualifying purchases.
Fix steps
- Verify the model tag reads DW80R5060US — Open the door and look on the inner door edge or left/right side of the tub opening.
- Reset LC: unplug the dishwasher or switch off the breaker for 5 minutes, then restore power.
- Remove and clean the tub filter, confirm the inlet valve screen is clear, and check the door gasket before assuming a pump or valve failure for LC.
- Cross-check part fit with DW80R5060US before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Professional assistance recommended
This issue may be unsafe for DIY repair. Follow the safety guidance above and contact a qualified technician.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does LC mean on a Samsung DW80R5060US?
Leakage error — the leak sensor detected moisture. The dishwasher will keep draining to protect the floor.
How do I reset LC on a DW80R5060US?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. If LC returns on the DW80R5060US, the underlying fault is still present.
What part do I need for DW80R5060US LC?
Try the reset and troubleshooting steps first. LC on the DW80R5060US is not always a failed part.
Is LC on the DW80R5060US easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.