Samsung Dishwasher LC error code
Dishwasher
Samsung dishwasher error code LC means: Leakage error — the leak sensor detected moisture. The dishwasher will keep draining to protect the floor. This guide covers how to reset the code, the most common causes, step-by-step troubleshooting, and replacement parts that typically resolve LC.
Safe to keep using?
Stop using
No immediate safety hazard detected, but monitor during use.
- • Unplug the appliance before inspection.
- • Turn off the water supply before disconnecting hoses.
- • Do not continue using the appliance until the cause is identified.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$75
What it means
Leakage error — the leak sensor detected moisture. The dishwasher will keep draining to protect the floor.
How to fix it
- Unplug the dishwasher or turn off power at the breaker before inspecting any components.
- Reset Samsung LC: leave power off for 5 minutes, restore power, then restart. Confirm whether LC returns.
- Check the most common cause for LC: Leakage error — the leak sensor detected moisture. The dishwasher will keep draining to protect the floor.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
- Reassemble, restore power, and run a test cycle. If LC returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
FAQ
What does LC error code mean on a Samsung dishwasher?
Leakage error — the leak sensor detected moisture. The dishwasher will keep draining to protect the floor.
What does Samsung LC mean?
Leakage error — the leak sensor detected moisture. The dishwasher will keep draining to protect the floor.
How do I reset Samsung dishwasher LC?
Unplug the dishwasher or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored LC after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Samsung LC?
Not always — some LC errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Can I fix Samsung error LC myself?
Many LC errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Do I need a replacement part for LC?
Not always — some LC errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Samsung LC on specific models
Other Samsung Dishwasher codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Leakage error — the leak sensor detected moisture. The dishwasher will keep draining to protect the floor.
FixApplianceCode guidance
Start with basic checks for Samsung LC before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-08-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure