WF45T6000AW UE error
Your Samsung WF45T6000AW is showing UE. Before replacing parts, confirm the model tag matches WF45T6000AW: Door frame or rear panel sticker — confirm WF45T before ordering parts. On this Samsung washer, UE means Unbalanced load — washer stopped during spin. The steps below follow the field-service order for the WF45T6000AW platform — not the generic Samsung UE page. Cross-check part fit with WF45T6000AW before ordering — use the model-specific parts diagram. If the code cleared after a reset but returned mid-cycle, treat that as a confirmed fault rather than a one-time glitch.
Fix steps
- Verify the model tag reads WF45T6000AW — Door frame or rear panel sticker — confirm WF45T before ordering parts.
- Reset UE: unplug the washer or switch off the breaker for 5 minutes, then restore power.
- Check inlet hoses, drain hose routing, and the door seal for obstructions or leaks before assuming an internal component failed for UE.
- Cross-check part fit with WF45T6000AW before ordering — use the model-specific parts diagram.
- Run a test cycle after repair. If the code returns, use the compatible parts below or the full brand code guide.
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FAQ
What does UE mean on a Samsung WF45T6000AW?
Unbalanced load — washer stopped during spin.
How do I reset UE on a WF45T6000AW?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. If UE returns on the WF45T6000AW, the underlying fault is still present.
What part do I need for WF45T6000AW UE?
Start with the WF45T6000AW-compatible parts listed below. UE often points to a failed component on this Samsung washer.
Is UE on the WF45T6000AW easy to fix?
Many owners fix this themselves with basic tools. Start with the reset and steps above, then check compatible parts below.