Samsung washer UE error code
- Washer
Samsung washer UE halts the spin when the load cannot balance — especially with single heavy items like a blanket or rug. WF45R6100 and similar models are sensitive to small unbalanced loads. UE is usually fixed by redistribution, not parts.
Reviewed August 2025 · sources below
Safe to keep using?
Stop using
Severe overheating requires stopping use until the cause is identified.
- • Unplug the appliance before inspection.
- • Do not continue using the appliance until the cause is identified.
Next step
Still seeing UE?
Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
How to fix UE
- Pause, open the door, and spread items evenly around the drum.
- Add a few towels if washing one heavy piece — the drum needs mass on opposite sides.
- Confirm the washer is level front-to-back and side-to-side.
- Run Spin only with a medium mixed load to verify UE clears.
- If UE occurs every spin with balanced loads, inspect suspension rods or shocks for wear.
Call a pro when: Call a pro if the tub hits the cabinet or UE persists with mixed loads after leveling.
What UE means
Unbalanced load — washer stopped during spin.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$75
Professional assistance recommended
This issue may be unsafe for DIY repair. Follow the safety guidance above and contact a qualified technician.
Questions about UE
What does UE mean on Samsung washer?
UE is unbalanced load — the washer stopped spinning to prevent damage.
How do I reset Samsung UE?
Redistribute clothes and restart — no power reset needed if the load balances.
Do I need parts for UE?
Rarely — suspension parts only if UE happens on every balanced cycle.
Why UE on one item?
Single heavy items cannot balance — add items or lower spin speed.
Samsung UE on specific models
Other Samsung Washer codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Unbalanced load — washer stopped during spin.
FixApplianceCode guidance
Start with basic checks for Samsung UE before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-11-05
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure