Samsung Dryer dC error code
Dryer
Samsung dryer error code dC means: Door is open or the latch is not secured — close the door firmly and clear laundry from the seal. Some displays show this as dE or dF. This guide covers how to reset the code, the most common causes, step-by-step troubleshooting, and replacement parts that typically resolve dC.
Safe to keep using?
Stop using
No immediate safety hazard detected, but monitor during use.
- • Unplug the appliance before inspection.
- • Do not continue using the appliance until the cause is identified.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$100
What it means
Door is open or the latch is not secured — close the door firmly and clear laundry from the seal.
How to fix it
- Unplug the dryer or turn off power at the breaker before inspecting any components.
- Reset Samsung dC: leave power off for 5 minutes, restore power, then restart. Confirm whether dC returns.
- Check the most common cause for dC: Door is open or the latch is not secured — close the door firmly and clear laundry from the seal.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
- Reassemble, restore power, and run a test cycle. If dC returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
FAQ
What does dC error code mean on a Samsung dryer?
Door is open or the latch is not secured — close the door firmly and clear laundry from the seal.
What does Samsung dC mean?
Door is open or the latch is not secured — close the door firmly and clear laundry from the seal.
How do I reset Samsung dryer dC?
Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored dC after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Samsung dC?
Not always — some dC errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Can I fix Samsung error dC myself?
Many dC errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Do I need a replacement part for dC?
Not always — some dC errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Samsung dC on specific models
Other Samsung Dryer codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Door is open or the latch is not secured — close the door firmly and clear laundry from the seal.
FixApplianceCode guidance
Start with basic checks for Samsung dC before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-08-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
FixApplianceCode may earn a commission when you purchase through qualifying links, at no additional cost to you. Affiliate disclosure