KitchenAid dryer PF error code
- Dryer
KitchenAid dryer PF means the control detected a power interruption — the display may show PF after a brief outage or tripped breaker. On electric dryers, PF is informational: restore stable power and press Start to clear it. If PF appears every cycle, inspect the terminal block and breaker for loose connections rather than replacing the board.
Reviewed August 2025 · sources below
Safe to keep using?
No safety issue
This is a status or lock code, not a hardware fault.
2 product recalls may apply
Brand-level matches — verify your model.
Show
2 product recalls may apply
Brand-level matches — verify your model.
How to fix PF
- Check the dryer breaker — flip fully OFF then ON on the 30A double-pole breaker.
- Confirm the power cord is firmly seated at the terminal block behind the dryer.
- Press Start or any button to acknowledge PF — most models clear PF once power is stable.
- If PF returns every cycle, inspect the outlet and cord for intermittent voltage drops.
- Replace the cord or terminal block only if you see burn marks or loose neutrals.
Call a pro when: Call an electrician if the breaker trips or voltage is unstable at the outlet.
Next step
Still having trouble after the code fix?
This code is usually a status or maintenance notice, not proof of a failed part. Try the steps above first; then describe what still isn't working.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
What PF means
Power failure — the drying cycle was interrupted. Hold Start to resume.
Likely causes
Power failure — the drying cycle was interrupted. Hold Start to resume.
Check: Press Power or Start/Pause to clear the code, then restart the cycle.
Est. cost: $0–$0
A loose plug or half-tripped breaker can interrupt power mid-cycle and store the status.
Check: Reseat the cord, reset the breaker fully off then on, and avoid extension cords.
Est. cost: $0–$0
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 5 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 5
Check the dryer breaker — flip fully OFF then ON on the 30A double-pole breaker.
Did the repair resolve the issue?
Restoring repair progress…
Questions about PF
What does PF mean on a KitchenAid dryer?
PF is power failure — the control logged a power interruption.
How do I clear KitchenAid dryer PF?
Restore power and press Start. PF is usually informational after an outage.
Do I need a board for PF?
Rarely — PF after outages is normal. Persistent PF suggests cord or breaker issues.
Can a loose cord cause PF?
Yes — intermittent contact at the terminal block can trigger PF repeatedly.
KitchenAid PF on specific models
Other KitchenAid Dryer codes
Prevent this problem next time
- Use lock features only when needed
- Avoid cutting power mid-cycle
Sources
Manufacturer meaning
Power failure — the drying cycle was interrupted. Hold Start to resume.
FixApplianceCode guidance
Clear the PF status code and restart. No replacement part is needed.
Source type: Editorial
Source: FixApplianceCode status-code guidance
Last reviewed: 2026-10-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure