Samsung Washer dE error code
- Washer
On Samsung washers, error dE indicates: Door lock error — door not closing or locking. Start with a 5-minute power reset at the breaker, then follow the washer-specific checks below before ordering replacement parts for dE. If the code returns on two consecutive cycles after a reset, treat it as a confirmed fault — not a one-time power glitch.
Reviewed August 2025 · sources below
Safe to keep using?
Safe for limited use
No immediate safety hazard detected, but monitor during use.
- • Monitor the appliance during use and stop if symptoms worsen.
Next step
Still seeing dE?
Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
How to fix dE
- Unplug the washer or turn off power at the breaker before inspecting any components.
- Reset Samsung dE: leave power off for 5 minutes, restore power, then restart. Confirm whether dE returns.
- Check the most common cause for dE: Door lock error — door not closing or locking.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, the fix often requires a replacement part (see recommended parts below).
- Reassemble, restore power, and run a test cycle. If dE returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
What dE means
Door lock error — door not closing or locking.
Buy the replacement part
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$75
Guided repair checklist
Complete the safe checks one at a time. Progress is saved for this browser so you can continue later.
0 of 6 checks recorded
Recommended next action
Start with this check before considering replacement parts.
Check 1 of 6
Unplug the washer or turn off power at the breaker before inspecting any components.
Did the repair resolve the issue?
Restoring repair progress…
Questions about dE
What does dE error code mean on a Samsung washer?
Door lock error — door not closing or locking.
How do I reset Samsung washer dE?
Unplug the washer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored dE after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Samsung dE?
Often yes — error dE frequently points to a failed component. Check the recommended parts below for direct replacements.
Can I fix Samsung error dE myself?
Many dE errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Samsung dE on specific models
Other Samsung Washer codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Door lock error — door not closing or locking.
FixApplianceCode guidance
Start with basic checks for Samsung dE before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-11-05
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure