Samsung Dryer FC error code
- Dryer
On Samsung dryers, error FC indicates: Power frequency error — restart the cycle. If it returns, the supply frequency is out of range. Start with a 5-minute power reset at the breaker, then follow the dryer-specific checks below before ordering replacement parts for FC.
Reviewed August 2025 · sources below
Safe to keep using?
Stop using
Severe overheating requires stopping use until the cause is identified.
- • Unplug the appliance before inspection.
- • Do not continue using the appliance until the cause is identified.
Next step
Still seeing FC?
Show a photo or describe the symptom. Answer a few safety-first questions and see whether a part is needed.
Free guided checks · No account required · Don’t open live electrical, gas, or refrigerant equipment
How to fix FC
- Unplug the dryer or turn off power at the breaker before inspecting any components.
- Reset Samsung FC: leave power off for 5 minutes, restore power, then restart. Confirm whether FC returns.
- Check the most common cause for FC: Power frequency error — restart the cycle. If it returns, the supply frequency is out of range.
- Inspect hoses, connections, and visible wiring for damage, clogs, or loose fittings.
- If a reset and basic checks don't clear the code, use our lookup tool for AI-powered diagnosis or contact a qualified technician.
- Reassemble, restore power, and run a test cycle. If FC returns, the faulty component likely needs replacement.
Call a pro when: Call a technician if you smell burning, see sparking, hear grinding from the motor, or the code returns after replacing the suspected part.
What FC means
Power frequency error — restart the cycle. If it returns, the supply frequency is out of range.
Likely causes
Many codes resolve with cleaning, resetting, or reconnecting.
Check: Power-cycle the appliance and check for obvious blockages or loose connections.
Est. cost: $0–$0
Wear or electrical failure of an internal part.
Check: If basic checks fail, the faulty component likely needs replacement.
Est. cost: $0–$100
Professional assistance recommended
This issue may be unsafe for DIY repair. Follow the safety guidance above and contact a qualified technician.
Questions about FC
What does FC error code mean on a Samsung dryer?
Power frequency error — restart the cycle. If it returns, the supply frequency is out of range.
How do I reset Samsung dryer FC?
Unplug the dryer or switch it off at the breaker for 5 minutes, then restore power and restart. A reset clears a stored FC after a glitch, but the code will return if the underlying fault is still present.
What part do I need for Samsung FC?
Not always — some FC errors are caused by user-fixable issues like clogs or unbalanced loads. Try the troubleshooting steps first.
Can I fix Samsung error FC myself?
Many FC errors can be fixed DIY if you're comfortable with basic tools. Start with the reset and steps above. If the issue involves electrical components or the code returns after replacing parts, call a professional.
Other Samsung Dryer codes
Prevent this problem next time
- Follow manufacturer maintenance schedule
- Address small issues before they worsen
Sources
Manufacturer meaning
Power frequency error — restart the cycle. If it returns, the supply frequency is out of range.
FixApplianceCode guidance
Start with basic checks for Samsung FC before ordering parts.
Source type: Part database
Source: ModelPartFinder + FixApplianceCode editorial
Last reviewed: 2026-10-24
Repair guidance is for informational purposes only. We do not guarantee that any fix will resolve your issue, and you assume all risk when following these steps. Terms & disclaimer
As an Amazon Associate I earn from qualifying purchases. Some links may also earn other retailer commissions, at no additional cost to you. Affiliate disclosure